Forza detailed drawings & specifications

In order to view or download our technical information you need to register to create a login. If you've already registered and received our authorisation email please login below.

Login

*
*

Terms & Conditions of use

By clicking proceed you agree to our terms and conditions of use

REGISTER HERE to set up your user login
Forgot your password?

Register

*
*
*
*
*
*

* indicates a mandatory field

*

By clicking register you agree to our terms and conditions of use

<< Back to login

Enter your email address below

<< Back to login

Forza - Defining Doors
Veneer Guide

FD120 Intumescent Seal Specification

Intumescent Seal Specification for FCW120 Door Leaves Installed in Timber Frames

Location Size and Position
Stiles/jambs

FORZA PVC-seals
1no 20 x 4 mm seal fitted in a groove 7 mm from the pull face in the frame reveal
1no 25 x 4 mm seal fitted in a groove 33 mm from the pull face in the frame reveal
OR
2no 22 x 4 mm seals, equally spaced with a 6 mm gap between them, fitted in grooves in the frame reveal 

Head

FORZA PVC-seals
1no 20 x 4 mm seal fitted in a groove 7 mm from the pull face in the frame reveal
1no 25 x 4 mm seal fitted in a groove 33 mm from the pull face in the frame reveal
OR
2no 22 x 4 mm seals, equally spaced with a 6 mm gap between them, fitted in grooves in the frame reveal 

Base

FORZA Flex-seal
1no 47 x 1 mm seal fitted centrally in the leaf edge, fixed at 100mm centres with pairs of Arrow T50 (1/4") staples 

Square meeting stiles

FORZA PVC-seal
2no 20 x 4mm seals; 1no fitted in each leaf edge, with one set 5mm from the pull face and the other set 5mm from the push face
OR
2no 22 x 4 mm seals, equally spaced with a 6 mm gap between them, fitted in grooves in the frame reveal 

Interface between overpanel and frame/transom 

FORZA PVC-seal
2no 20 x 4mm seals; 1no fitted in each leaf edge, with one set 5mm from the pull face and the other set 5mm from the push face
OR
2no 22 x 4 mm seals, equally spaced with a 6 mm gap between them, fitted in grooves in the frame reveal

  

Intumescent Seal Specification for FCH120 Door Leaves Installed in Timber Frames

Location Size and Position
Stiles/jambs

2 no 20 x 4mm H120 PVC cased seals fitted 5mm either side of the centre line in the frame reveal 

Head

1 no 15 x 2mm H120 PVC cased seal centrally fitted in the leaf head 

Leaf vertical edges

1no 15 x 2mm H120 PVC cased seal centrally fitted in the leaf edge underneath the outer lipping 

Bottom edge of leaf

1 no 38 x 2mm H120 PVC cased seal fitted centrally in the bottom edge of the leaf 

fis1.jpg GAI_thumb-56px.jpgACS Logos1.jpgribalogo_thumb_56px.jpgForza Doors specification summaries are available through the RIBA Product Selector and NBs Plus